Changing bulbs in the front bumper

Fig. 218 In the front bumper, right-hand side: removing the headlight

Fig. 219 Changing the bulbs in the headlights

1. 1
   Observe and follow the instructions on the checklist .
2. 2
   Pull the cover forwards in the direction of the arrow .
3. 3
   Use the screwdriver from the tool kit to unscrew the securing bolt .
4. 4
   Pull the headlight out.
5. 5
   Release the connector and pull it off.
6. 6
   Turn the bulb holder anti-clockwise in the direction of the arrow as far as it will go and pull it out to the rear along with the bulb.
7. 7
   Replace the defective bulb with a new bulb of the same type.
8. 8
   Insert the bulb holder into the headlight and turn it clockwise as far as it will go.
9. 9
   Connect the connector to the bulb holder . The connector should audibly click into place.
10. 10
    Insert the headlight.
11. 11
    Use the screwdriver to screw in the securing bolt .
12. 12
    Place the cover onto the bumper.