Locking the front passenger door and rear doors manually

Fig. 192 In the end face of the front right-hand door: manual lock covered by a rubber seal

Fig. 193 Manually locking the vehicle with the vehicle key

The front passenger door and the rear doors can be locked manually. This does not activate the anti-theft alarm.

• Open the door.

• Remove the rubber seal from the end face of the door. The seal is marked by a lock symbol .

• Fold out the key bit of the vehicle key .

• Insert the key bit into the horizontal slot and push the small lever forwards .

• Put the rubber seal back in place and close the door fully.

• Ensure that the door is locked.

• If necessary, carry out this process on the other doors.

• Have the vehicle checked by a qualified workshop as soon as possible.

The doors can be unlocked and opened from inside by pulling the door release handle. You may have to pull the door release lever twice .