Before the journey
Opening or closing the panoramic sliding roof
In this manual: Before the journey
~1min read

Fig. 34 In the roof: turn the switch to open and close

Fig. 35 In the roof: push and pull the switch to tilt and close
First read and observe the introductory information and safety warnings
In order to tilt the panoramic sliding roof, the rotary switch must be in position .
| Function | Position of switch | Action |
|---|---|---|
| Open sliding roof completely: | Ⓒ | Turn the switch to the desired position. |
| Move sliding roof to convenience position: | Ⓑ | |
| Close sliding roof completely: | Ⓐ | |
| Tilt the tilting roof completely: | Ⓓ | Push the switch back briefly (arrow). |
| To stop the one-touch function: | Ⓓ or Ⓔ | Press or pull switch again briefly. |
| Close tilting roof completely: | Ⓔ | Pull the switch back briefly (arrow). |
| To set an intermediate position: | Ⓓ or Ⓔ | Hold the switch pushed or pulled back until the roof reaches the desired position. |
The panoramic sliding roof will work only when the ignition is switched on. The panoramic sliding roof can be operated several minutes after the ignition has been switched off, provided the driver door and front passenger door are not opened.
Test yourself
A quick Volkswagen Touran quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?