Roll-back function for the electric windows

First read and observe the introductory information and safety warnings

The roll-back function for the electric windows can reduce the risk of injuries when the windows are closing . If the one-touch closing function for a window does not work because it is stiff or is being obstructed, the window will automatically open again.

• Check to see why the window has not closed.

• Try to close the window again.

• If the window is not able to close twice within about 10 seconds because it is stiff or is being obstructed, automatic closing is switched off for approximately 10 seconds.

• If the window is still obstructed, the window stops at this point. To close the window without the roll-back function, press the button again within 10 seconds .

Closing the window without the roll-back function

• Try to close the window again within about 10 seconds by holding the button. The roll-back function is deactivated for a small function area of the closing path!

• If the closing process takes longer than approximately 10 seconds, the roll-back function will be reactivated. The window will then stop again if it meets another obstacle.

• Please go to a qualified workshop if the window still cannot be closed.

Closing the electric windows without the roll-back function could lead to severe injuries.

• Always take care when closing electric windows.

• Ensure that nobody obstructs the path of the electric windows, especially if the roll-back function is not active.

• The roll-back function does not prevent fingers or other body parts getting pinched against the window frame and becoming injured.

The roll-back function is also activated if the windows are closed using the vehicle key for convenience closing .