Volkswagen Touran Service Manual: Wax Spray -D 322 100 M2

Definition:

Wax Spray -D 322 100 M2-

Edition 01/2011

Product Description

Wax Spray -D 322 100 M2- is a long-term anti-corrosion agent. After drying, the product forms a light brown, wax-like film. Because of its hardness, the Wax Spray provides good protection against mechanical stress.

Wax Spray -D 322 100 M2- technical application information

Application

The material is primarily used in the vehicle area, but it is also used as temporary corrosion protection for tools and machines. The Wax Spray does not corrode vehicle paint and adheres to almost all base surfaces.

Note Before starting to apply, it is necessary to read the safety measures and advice in the safety data sheet. Even for products which are not required to be labeled by law, the usual safety measures must be observed for chemical emissions.

Processing

Bring the Wax Spray to room temperature (16 to 20 C (60.8 to 68 F).

Briefly shake the spray can before using.

The surfaces that are to be treated (underbodies, wheel housings, insides of door) must dry and be free of grease and dust.

The Wax Spray is sprayed on evenly in cross coats at a distance of 20 to 30 cm.

Caution Do not spray onto the steering, engine, driveshaft, exhaust, catalytic converter and brake systems.

Technical Data

Base	Wax mixture
Color	Light brown/transparent
Film type	Hard and wax-like
Density	0.735 g/cm³
Solids content	35.4 %
Flashpoint/Active agent	29 C (84.2F)
Flashpoint/Spray	< -20
Recommended layer thickness	50 mm/wet
Drying time	approximately 30 minutes
Heat stability	105 C (221 F)
Removability	Mineral spirits
Processing temperature	16 to 20 C (60.8 to 68 F)
Propellant gas (Aerosol)	Propane / Butane
Aerosol storage	Cool and dry, < 50 C (122 F)
Hazard warning	Highly flammable
Container	500 ml

Wax Spray -D 322 100 M2