While driving
Hill Start Assist
In this manual: While driving
~1min read
and safety warnings first⇒
to the topic
Hill Start Assist supports starting on inclines by actively holding the vehicle in place.
Hill Start Assist is activated automatically under these conditions| Conditions: Points 1 to 3 must be met at the same time: | ||
|---|---|---|
| Manual transmission | Automated manual transmission | |
| 1. | Hold the stationary vehicle on an incline with the foot brake until it moves off. | |
| 2. | The engine is running smoothly. | |
| 3. | Press the clutch pedal fully down and, when driving uphill forward, move the selector lever to position 1st gear, or when driving uphill in reverse, move it to position R. | When driving uphill forward, engage drive position D; when driving uphill in reverse, engage reverse position R. |
| To move off, take your foot off the brake pedal, release the clutch pedal at the same time (engaging the clutch) and accelerate. When engaging the clutch, the brake is released gradually. If you do not accelerate immediately, the brake releases automatically after a few seconds. | To move off, take your foot off the brake pedal and accelerate immediately. When moving off, the brake is released gradually. If you do not accelerate immediately, the brake releases automatically after a few seconds. | |
- As soon as one of the conditions listed under ⇒ Hill Start Assist is activated automatically under these conditions is no longer met.
- If the engine is running roughly or if there is an engine malfunction.
- When the engine is switched off or has stalled.
- When the driver's door is opened.
- Vehicles with automated manual transmission: When the selector lever is in neutral position N.
Was this page helpful?