Before driving

Load compartment cover

~1min read
Fig. 72

In the luggage compartment: fold the load compartment cover
up and down vertically.

Fig. 73

In the luggage compartment: remove and install the load compartment cover
.

Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

When opening and closing the tailgate, the load compartment cover is automatically raised or lowered if the retaining straps are attached.

Light clothing can be placed on the load compartment cover. Make sure the rear view is not restricted.

Folding the load compartment cover up and down vertically

Fold the load compartment cover vertically upward and press it into the side brackets ⇒ Fig. 72①. Make sure the load compartment cover is properly locked.

To fold down, press the load compartment cover down with light pressure. It will release from the bracket ⇒ Fig. 72①.

Removing the load compartment cover
  • Unhook the retaining straps from the tailgate ⇒ Fig. 73 (arrows).
  • Grasp the slightly opened load compartment cover on the right and left and pull it upward ⇒ Fig. 72②.
Installing the load compartment cover
  • Press the load compartment cover down into the side brackets ⇒ Fig. 72②.
  • Hook the retaining straps onto the tailgate ⇒ Fig. 73 (arrows).
Warning
Unsecured or improperly secured objects or animals on the load compartment cover may cause serious injuries during sudden driving or braking maneuvers and in accidents.
  • Do not stow hard, heavy or sharp objects loose or in bags on the load compartment cover.
  • Never transport animals on the load compartment cover.
  • Never drive with the load compartment cover raised. Always fold it down or remove it before driving.
Note
To avoid damage to the load compartment cover:
  • Always make sure the load compartment cover is firmly locked into the side brackets.
  • Only load the luggage compartment so high that the load compartment cover cannot press on the load when the tailgate is closed.