Before driving

Opening or closing the sunroof

~1min read
Fig. 27

In the headliner: turn the switch
to open and close.

Fig. 28

In the headliner: press the switch
to tilt and pull it to close.

Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

To tilt the sunroof, the rotary switch must be in basic position ①.

Function ⇒ Fig. 27 or ⇒ Fig. 28 Action
Sliding the sunroof fully open: ③ Turn the switch past position ② and hold it until the sunroof reaches the desired position.
Setting the sunroof to comfort position: ② Turn the switch to the desired position.
Setting an intermediate position: ② to ①
Closing the sunroof fully: ①
Tilting the sunroof fully open: ④ Briefly press the rear of the switch.
Stopping the automatic movement: ④ or ⑤ Briefly press or pull the switch again.
Closing fully: ⑤ Briefly pull the rear of the switch.

The sunroof only works when the ignition is switched on.

The closing movement that has started is interrupted as soon as the ignition is switched off and the sunroof switch is operated.

If the sunroof cannot be closed electrically, it must be closed manually. Emergency manual closing of the sunroof is not possible without removing vehicle parts. Have the vehicle checked by a qualified workshop.

Sliding sun blind

Using the handle at the front of the roof opening, slide the sun blind forward or back to the desired position.

The comfort position provides sufficient air circulation
with low wind noise at the same time.