Combined head and side airbags
Fig. 53On the left side of the vehicle: Deployment area
of the combined head and side airbag.
Fig. 54At the side of the front seat: Installation location
and deployment area of the combined head and side airbag.
and safety warnings first⇒
to the topic
Depending on the vehicle equipment, combined head and side airbags are installed for the front seats ⇒ Fig. 53. The combined head and side airbags are located in the outer seat back bolsters ⇒ Fig. 54 of the driver's seat and the front passenger seat.
The installation locations are marked with labels bearing the word AIRBAG.
The areas framed in red ⇒ Fig. 53 or ⇒ Fig. 54 are covered by the combined head and side airbags when they deploy (deployment areas). Therefore, never place or attach objects in these areas ⇒
.
In a side collision, the combined head and side airbag on the impact side of the vehicle deploys and reduces the risk of injury to the occupants' head and upper body on the side facing the impact.
A triggered airbag inflates in a fraction of a second and at very high speed.
- Always keep the deployment areas of the combined head and side airbags clear.
- No other persons, animals or objects may be located between the occupants on the front seats and the deployment areas of the airbags. Make sure that children and other passengers also observe this.
- Hang only light clothing on the coat hooks in the vehicle. Do not leave heavy or sharp-edged objects in the pockets.
- Do not mount accessories on the doors.
- Only fit seat covers or protective covers that are expressly approved for use in the vehicle. Otherwise, the combined head and side airbag may not deploy properly when triggered.
Improper handling of the driver's and front passenger seat can prevent the combined head and side airbags from working correctly and cause serious injury.
- Never remove the front seats from the vehicle or modify any of their components.
- If excessive force is applied to the seat back side bolsters, the combined head and side airbags may not trigger correctly, may not trigger at all, or may trigger unexpectedly.
- Have damage to the original seat covers or to the seam in the module area of the combined head and side airbags repaired immediately by a qualified workshop.