Before driving
Removing and installing rear head restraint
In this manual: Before driving
~1min read
Fig. 33Remove the rear head restraint.
and safety warnings first⇒
to the topic
The head restraints for the rear seats can be removed if necessary, for example when the rear seat backrest is to be folded down.
Removing rear head restraint- Unlock the rear seat bench backrest and fold it forward ⇒ Luggage compartment.
- Push the head restraint all the way up ⇒
.
- If necessary, insert the flat blade of a screwdriver into the slot of the cover cap ⇒ Fig. 33① and press in the direction of the arrow, holding it in this position.
- At the same time, press button ② while a second person pulls the head restraint all the way out.
- Fold the rear seat bench backrest back and make sure it engages securely. Make sure the seat belts are not pinched.
- Store the removed head restraint securely.
- Unlock the rear seat bench backrest and fold it forward ⇒ Luggage compartment.
- Position the head restraint correctly over the head restraint guides and insert it into the guides of the corresponding seat backrest.
- With the button pressed ⇒ Fig. 33②, push the head restraint down.
- Fold the rear seat bench backrest back and make sure it engages securely.
- Adjust the head restraints according to the correct seating position ⇒ Adjusting rear head restraint.
Driving with head restraints removed or incorrectly adjusted increases the risk of serious or fatal injuries in accidents and in sudden driving and braking maneuvers.
- Always drive with the head restraint correctly installed and adjusted when a person is seated in that seat position.
- Reinstall removed head restraints immediately so that passengers are properly protected.
When removing and installing the head restraint, make sure it does not strike the headliner or other vehicle components. Otherwise, the headliner and other vehicle components could be damaged.
Was this page helpful?