Engine coolant specification
and safety warnings first⇒
to the topic
The engine cooling system is filled at the factory with a mixture of specially treated water and at least 40 percent of the engine coolant additive G 13 (TL-VW 774 J). The engine coolant additive can be recognized by its purple color. The mixture of water and engine coolant additive provides antifreeze protection down to -25 °C (-13 °F), and also protects the light-alloy parts in the engine cooling system from corrosion. In addition, the mixture prevents limescale build-up and significantly raises the boiling point of the engine coolant.
To protect the engine cooling system, the proportion of engine coolant additive must always be at least 40 %, even when no antifreeze protection is needed because of warm weather or climate.
If stronger antifreeze protection is required for climatic reasons, the proportion of engine coolant additive can be increased. However, the proportion of engine coolant additive must not exceed 60 %, as otherwise the antifreeze protection decreases again and the cooling effect worsens.
When topping up engine coolant, use a mixture of distilled water and at least 40 % of the engine coolant additive - G 13 - or - G 12 plus-plus - (TL-VW 774 G) (both purple), to maintain optimal corrosion protection ⇒
.
Mixing - G 13 - with engine coolants - G 12 plus - (TL-VW 774 F), - G 12 - (red coloring) or - G 11 - (blue-green coloring) significantly impairs corrosion protection and should therefore be avoided ⇒
.
Insufficient antifreeze protection in the engine cooling system can lead to engine failure and thereby cause serious injuries.
- Make sure the proportion of the correct coolant additive is chosen according to the lowest ambient temperature expected where the vehicle is operated.
- At extremely low outside temperatures, the coolant can freeze and the vehicle can break down. Because the heating then also stops working, vehicle occupants wearing inadequate winter clothing can freeze to death.
Never mix original engine coolant additives with other engine coolants that are not approved by Volkswagen. Mixing with non-approved coolants risks serious damage to the engine and the engine cooling system.
- If the liquid in the coolant expansion tank is not pink (the color results from mixing the purple coolant additive with distilled water) but, for example, brown, - G 13 - has been mixed with a different, unsuitable engine coolant. In this case, the engine coolant must be changed immediately. Otherwise, serious malfunctions or engine damage may result!
Engine coolant and engine coolant additives can
pollute the environment. Catch leaked operating fluids and dispose of them properly and in an environmentally responsible manner.