While driving

Manual transmission: engaging a gear

~2min read
Fig. 96

Shift pattern of the 5-speed manual transmission.


Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

The positions of the individual gears are shown on the gear lever ⇒ Fig. 96.

  • Press the clutch pedal fully down and hold it.
  • Move the gear lever to the desired position ⇒ .
  • Release the clutch pedal to engage the clutch.

In some countries the clutch pedal must be fully depressed to start the engine.

Engaging reverse gear
  • Engage reverse gear only when the vehicle is stationary.
  • Press the clutch pedal fully down and hold it ⇒ .
  • Move the gear lever to neutral and press it down.
  • Push the gear lever fully to the right and then rearward into the reverse position ⇒ Fig. 96Ⓡ.
  • Release the clutch pedal to engage the clutch.
Downshifting

When downshifting while driving, always shift one gear at a time, i.e. into the next lower gear, and at engine speeds that are not too high ⇒.
At high speeds or engine speeds, skipping one or more gears when downshifting can cause clutch and transmission damage, even if the clutch is not engaged ⇒ .


Warning
The vehicle will move off immediately with the engine running as soon as a gear is engaged and the clutch pedal is released. This also applies when the parking brake is applied.
  • Never engage reverse gear while the vehicle is moving.
Warning
Improper downshifting into gears that are too low can result in loss of vehicle control and cause accidents and serious injuries.

Note

If the gear lever is moved into a gear that is too low at high speeds or high engine speeds, significant clutch and transmission damage may result. This also applies if the clutch pedal remains depressed and the clutch is not engaged.

Note
Observe the following to avoid damage and premature wear:
  • Do not rest your hand on the gear lever while driving. Pressure from your hand is transmitted to the shift forks in the transmission.
  • Make sure the vehicle is completely stationary before engaging reverse gear.
  • Always press the clutch pedal fully down when changing gear.
  • Do not hold the vehicle on an incline with the engine running and the clutch slipping.