Brake fluid

Location of the brake fluid reservoir

Checking the level

The fluid reservoir is concealed under the round cover at the rear of the engine compartment.

The round cover must be removed first before the reservoir cap can be accessed.

The brake fluid should always be between the MIN and MAX marks on the inside of the reservoir.

Check, without removing the cap, that there is sufficient fluid in the reservoir.

Fluid type: DOT 4+ boiling point >536 °F (280 °C), P/N 9437433

Replace: The fluid should be replaced according to the intervals specified in the Warranty and Service Records Information booklet.

When driving under extremely hard conditions (mountain driving, etc), it may be necessary to replace the fluid more often. Consult a trained and qualified Volvo service technician.

Always entrust brake fluid changing to a trained and qualified Volvo service technician.

Filling

1. Turn and open the cover.

2. Unscrew the reservoir cap and fill the fluid.

The level must be between the MIN and MAX marks.