Removing the headlight housing

1. Switch off the ignition by briefly pressing the START/STOP ENGINE button.

2. Remove the remote key from the ignition slot1.

3. (Upper illustration under "Headlight housing").

1 Withdraw the headlight housing's locking pins.

2 Pull the headlight housing straight out.

4. (Lower illustration under "Headlight housing").

1 Unplug the wiring connector by holding down the clip with your thumb.

2 Pull out the connector with the other hand.

5. Lift out the housing and place it on a soft surface to avoid scratching the lens.

6. Replace the defective bulb(s).