Removal

Switch off the ignition, remove the remote key from the ignition slot and wait at least 5 minutes before disconnecting the battery so that all information in the vehicle's electrical system can be stored in the control modules.

1 Open the clips on the front cover and remove the cover.
2 Release the rubber molding so that the rear cover is free.
3 Remove the rear cover by pulling it away.
4 1 Detach the black negative cable.
2 Detach the red positive cable
3 Detach the ventilation hose from the battery
4 Loosen the screw holding the battery clamp.
5Move the battery to the side and lift it up.