Operation and function

LDW can be switched on or off by pressing the button on the center console. A light in the button illuminates when the function is on.

The trip computer display shows Lane Depart Warn Standby <65 km/h when the function is in standby mode.

When LDW is in standby mode, the function is activated automatically after the camera has monitored the road’s side marker lines and the vehicle’s speed exceeds 65 km/h.

Lane Depart Warn Available will be displayed. If the vehicle’s speed falls below 60 km/h, LDW will return to standby mode and Lane Depart Warn Standby <65 km/h will be displayed.

If the camera can no longer monitor the road’s side marker lines, Lane Depart Warn Unavailable will be displayed.

If the vehicle unexpectedly crosses the lane’s left or right side marker lines, the driver will be alerted by an audible signal.

No warning signal will be given in the following situations:

• The turn signal is being used
• The driver’s foot is on the brake pedal1
• The throttle pedal is pressed quickly1
• If the steering wheel is moved quickly1
• In sharp turns that cause the vehicle’s body to sway

See page 177 for information on the camera’s limitations.

WARNING

The driver will only be warned once for each time the wheels cross a marker line. No alarm will be given if a marker line is between the wheels.