Installing the water pump

1. Install:

• Water pump assembly "1"
• O-rings "2"

NOTE:

• Align the projection "a" on the impeller shaft with the slit "b" on the camshaft sprocket bolt.
• Lubricate the O-rings with a thin coat of lithiumsoap- based grease.

2. Fill:

• Cooling system (with the specified amount of the recommended coolant)

Refer to "CHANGING THE COOLANT" on page 3-15.

3. Check:

Cooling system Leaks Repair or replace the faulty
part.

4. Measure:

Radiator cap opening pressure Below the specified pressure
Replace the radiator cap.

Refer to "CHECKING THE RADIATOR" on page 6-3.