Removing the generator

1. Remove:

• Generator rotor nut "1"
• Washer

NOTE:

• While holding the generator rotor "2" with the sheave holder "3", loosen the generator rotor nut.
• Do not allow the sheave holder to touch the projection on the generator rotor.

2. Remove:

• Generator rotor "1" (with the flywheel puller "2")
• Woodruff key

To protect the end of the crankshaft, place an appropriate sized socket between the flywheel puller set center bolt and the crankshaft.

NOTE:

Make sure the flywheel puller is centered over the generator rotor.