Fuel Injection System
Checking and adjusting idle speed/ignition timing/CO content
In this manual: Fuel Injection System
~1min read
GENERAL INFORMATION
As part of routine maintenance, adjustment of idle speed, ignition timing and CO content is not required, since these parameters are set by the control system according to requirements.
If actual values differ from the specified values, the cause lies in faulty components, which must be replaced. Qualified checking of the control system requires special diagnostic equipment.
CAUTION
Idle speed can be slightly changed by reprogramming the control unit with V.A.G tester.Test yourself
A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?