Chevrolet Cruze Quiz
Chevrolet Cruze Repair Manual

Front Bumper Energy Absorber Bracket Replacement

In this manual: Chevrolet Cruze Repair Manual
Chevrolet Cruze Owners Manual — 401Chevrolet Cruze Repair Manual — 520Radio — 10Audio Players — 5Bluetooth Phone/ Devices — 3Navigation — 13Introduction — 6Trademarks and License Agreements — 1Voice Recognition — 1
~1min read
050100150200250160118N·mlb·ft
Tightening torque found on this page
Chevrolet Cruze. Front Bumper Energy Absorber Bracket Replacement

Preliminary Procedure

Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement

  1. Drivetrain and Front Suspension Frame Bolt Front

Caution: Refer to Fastener Caution in the Preface section.

Tighten 160 N·m Note: Do NOT reuse the old bolt.

  1. Front Bumper Energy Absorber Bracket Bolt

Tip

For removal only loosen the bolt.

Tighten

22 N·m

  1. Front Bumper Energy Absorber Bracket

Note: Secure the drivetrain and front suspension frame with hydraulic jack.

Front Bumper Impact Bar Replacement

The front bumper impact bar is welded on, and must be replaced at the factory welds to retain structure integrity. Refer to Front Bumper Impact Bar Replacement.

Test yourself

A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.