Chevrolet Cruze Repair Manual

Front Lower Control Arm Bushing Replacement

5steps
~30min
2/5difficulty
0204060801005541N·mlb·ft
Tightening torque found on this page
Done 0 of 5
Chevrolet Cruze. Front Lower Control Arm Bushing Replacement

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
  3. Remove the lower control arm. Refer to Lower Control Arm Replacement.

Lower Control Arm Rear Bushing Bolt

Lower Control Arm Rear Bushing

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Discard Bushing Bolt and use NEW ONLY.
  2. Tighten Bushing Bolt with vehicle standing on the ground.

Tighten 55 N·m +45-60 degrees

Special Tools

EN-45059 Torque Angle Sensor Kit . Refer to Special Tools.

Test yourself

A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.