Headlamps, Front Turn Signal and Parking Lamps

1. Parking/Turn Signal Lamp 2. High-Beam Headlamp/ Low-Beam Headlamp and DRL

High-Beam Headlamp/ Low-Beam Headlamp and DRL

1. Open the hood
2. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle.

3. Remove the connector retaining tab (1). 4. Disconnect the wiring harness connector from the bulb (3) by pressing the connector release (2) and pulling straight back. 5. Remove the bulb (3) from the headlamp assembly by turning counterclockwise and pulling straight back. 6. Install the new bulb in the headlamp assembly by turning clockwise. 7. Install the wiring harness connector to the bulb. Be sure the connector release (2) locks into place. 8. Install the connector retaining tab (1).

9. For the driver side, reinstall the windshield washer bottle filler neck by firmly pushing it straight into the bottle. Ensure that the filler neck clip engages into the underhood electrical center retainer.

Parking/Turn Signal Lamp 1. Open the hood.

2. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle.

3. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise.

4. Remove the bulb from the bulb socket. 5. Install the new bulb in the bulb socket. 6. Install the bulb socket into the headlamp assembly by turning clockwise.

7. For the driver side, reinstall the windshield washer bottle filler neck by firmly pushing it straight into the bottle. Ensure that the filler neck clip engages into the underhood electrical center retainer.