Taillamps, Turn Signal, Sidemarker, Stoplamps, and Back-Up Lamps

Trunk Deck Inboard Taillamps

1. Open the trunk.

2. Remove the trunk deck trim cover (1).

3. Remove the bulb socket (2) by turning counterclockwise and pulling straight out.

4. Remove the bulb from the socket. 5. Install the new bulb in the bulb socket. 6. Install the bulb socket by turning clockwise.

7. Install the trunk deck trim cover.

1. Sidemarker Lamp
2. Turn Signal Lamp
3. Stoplamp/Taillamp
4. Back-up Lamp

To replace any one of these bulbs:

Stoplamp/Taillamp, Turn Signal, Back-up, and Rear Sidemarker Lamp

1. Open the trunk.

2. Open the two screw covers.

3. Remove the two screws that secure the taillamp assembly.

4. Remove the taillamp assembly by pulling it straight back. 5. Remove the bulb socket from the taillamp assembly by turning it counterclockwise. 6. Install a new bulb into the bulb socket. 7. Install the bulb socket into the taillamp assembly by turning it clockwise. 8. Install the taillamp assembly and tighten the two screws.

9. Close the two screw covers.