Chevrolet Cruze Quiz
Chevrolet Cruze Repair Manual

Instrument Panel Tie Bar Replacement (Right Hand Drive)

In this manual: Chevrolet Cruze Repair Manual
Chevrolet Cruze Owners Manual — 401Chevrolet Cruze Repair Manual — 520Radio — 10Audio Players — 5Bluetooth Phone/ Devices — 3Navigation — 13Introduction — 6Trademarks and License Agreements — 1Voice Recognition — 1
2steps
~12min
1/5difficulty
010203040502216N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Removal Procedure

  1. Remove instrument panel compartment. Refer to Instrument Panel Compartment Replacement.
    Chevrolet Cruze. Removal Procedure
  2. Remove instrument panel wiring harness (2) from instrument panel tie bar (1).

Disconnect electrical connectors.

Chevrolet Cruze. Removal Procedure
  1. Remove instrument panel tie bar (1).

Remove 4 instrument panel tie bar bolts (3, 4).

Remove 2 instrument panel tie bar nuts (2).

Installation Procedure

Caution: Refer to Fastener Caution in the Preface section.

Chevrolet Cruze. Installation Procedure
  1. Install instrument panel tie bar (1).

Install 4 instrument panel tie bar bolts (3, 4) and tighten to 22 N·m.

Install 2 instrument panel tie bar nuts (2) and tighten to 9 N·m.
Chevrolet Cruze. Installation Procedure
  1. Install instrument panel wiring harness (2) to instrument panel tie bar (1).

Connect electrical connectors.

  • Install instrument panel compartment. Refer to Instrument Panel Compartment Replacement.

    • Test yourself

    A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.