Chevrolet Spark Quiz
Vehicle Care

High/Low-Beam Headlamp

In this manual: Vehicle Care
Introduction — 1In Brief — 34Keys, Doors, and Windows — 27Seats and Restraints — 44Storage — 6Instruments and Controls — 42Lighting — 18Infotainment System — 38Climate Controls — 6Driving and Operating — 45Vehicle Care — 97Service and Maintenance — 9Technical Data — 5Customer Information — 25OnStar — 9
10steps
~60min
3/5difficulty
Done 0 of 10
Chevrolet Spark. High/Low-Beam Headlamp

  1. Connector Retaining Tab
  2. Connector Release
  3. Headlamp Bulb

To replace a headlamp bulb:

  1. Open the hood. See Hood on page 10-5.
  2. Remove the connector retaining tab (1).
  3. Disconnect the wiring harness connector from the bulb (3) by pressing the connector release (2) and pulling straight back.
  4. Remove the bulb (3) from the headlamp assembly by turning counterclockwise and pulling straight back.
  5. Install the new bulb in the headlamp assembly by turning clockwise.
  6. Install the wiring harness connector to the bulb. Be sure the connector release (2) locks into place.
  7. Install the connector retaining tab (1).

Test yourself

A quick Chevrolet Spark quiz: every answer comes with an explanation and a link to the manual page.