Rear lamps (tourer)

Rear lamp on wing

Remove the lateral boot trim A.

To do so :

1 Pull it towards towards the inside of the boot.
2 Pull it upwards.

3 Disconnect the connector B.
4 Unscrew the fixing screw C.
5 Remove the lamp from its housing.

6 Detach the bulb holder D.
7 Replace the faulty bumb.
8 Replace the bulb holder D.
9 Place the lamp in its housing.
10 Screw in the fixing screw C.
11 Connect the connector B.
12 Refit the trim A.

Note : You can use the spare wheel jack handle to screw or unscrew the fixing screw C.