HomeLink® Rolling Code Garage Door Opener Final Steps

NOTE:

You have 30 seconds to initiate Rolling Code Final Step 2 after completing Rolling Code Final Step 1.

1. 1
   On the garage door opener motor (in the garage), locate the "LEARN" or "TRAIN" button. This is usually found where the hanging antenna wire is attached to the garage door opener motor. Firmly press and release the "LEARN" or "TRAIN" button.
2. 2
   Return to the vehicle and press the programmed HomeLink® button three times (holding the button for two seconds each time). If the garage door opener motor operates, programming is complete.
3. 3
   Press the programmed HomeLink® button to confirm that the garage door opener motor operates. If the garage door opener motor does not operate, repeat the Rolling Code final steps procedure.