General Procedures - Factory Mode Deactivation

Deactivation

1. 1
   Set the ignition to the OFF position.
2. 2
   Make sure the battery is fully charged.
   Refer to: Battery Charging (414-01 Battery, Mounting and Cables, General Procedures).
3. 3
   For non-push-button start, turn the ignition on and off 60 times.
4. 4
   For push-button start, press the engine start/stop button 120 times.
5. 5
   Refer to the transport mode deactivation procedure in this section.
   Refer to Transport Mode Deactivation (419-10 Multifunction Electronic Modules, General Procedures).