Ford Escape: Wheels and Tires / General Procedures

Check

1
NOTE
The example below shows how the wheel-to-hub clearance can be used to compensate for the high point of radial runout or Road Force®. Following the procedure will ensure the best optimization.
Position the wheel and tire assembly on the vehicle so that the high point of the radial runout or Road Force® is at the 6 o'clock position, and install the wheel nuts by hand until snug.
2
NOTE
Do not allow the full weight of the vehicle to rest on the tires while tightening the wheel nuts.
Lower the vehicle until the tires contact the ground, lightly loading the suspension. Tighten the wheel nuts.
Refer to: Wheels and Tires (204-04A Wheels and Tires, Removal and Installation).