General Procedures - Bezel Diagnostics

Check

• Inoperative ACM
• Inoperative (blank or does not power up) display unit (non-touchscreen display or touchscreen display)
• Inoperative FCIM or radio control panel
• Inoperative steering wheel switch

1. 1
   The ignition is on.
2. 2
   Operate the audio system in AM/FM mode.
   

   For vehicles with SYNC	For vehicles with an ACM-integrated CD player, press and hold the FCIM EJECT and SEEK UP buttons simultaneously until the bezel diagnostics mode is entered. If supported, the Speaker Walk-Around Test starts and the display shows each speaker as it is tested.
   	For vehicles without an ACM-integrated CD player, press and hold the steering wheel SEEK UP and FCIM SEEK UP simultaneously until the bezel diagnostics mode is entered. If supported, the Walk-Around Test starts and the display shows each speaker as it is tested.
   For vehicles without SYNC	Press and hold the FCIM POWER ON and SEEK DOWN buttons simultaneously until the bezel diagnostics mode is entered. If supported, the Speaker Walk-Around Test starts and the display shows each speaker as it is tested.

3. 3
   After the speaker test (all speakers test) is complete, the following information becomes available:

   Vehicles with SYNC

   
   

   Menu	Submenu
   APIM Diagnostics	Part Numbers
   	Software Versions
   	Configuration Status
   	Location Information
   	Tone Test
   	Touchscreen Activation Test
   	Test Pattern Display
   	RGB Pixel Test
   	SYNC Versions
   	Exit Diagnostics
   AHU Diagnostics (AHU refers to ACM)	AHU Part Numbers (Sirius serial number also displayed)
   	Radio Signal Strength
   	Speaker Bypass Test active (if not equipped with DSP)
   	Exit Diagnostics
   DSP Diagnostics	DSP Part Numbers
   	Speaker Bypass Test active
   	Exit Diagnostics
   EFP Diagnostics (EFP refers to the FCIM, which communicates over CAN)	EFP Part Numbers
   	Exit Diagnostics
   ICP Diagnostics (ICP refers to the Radio Control Panel/FCIM, which communicates over LIN)	ICP Part Numbers
   	Exit Diagnostics
   SDM Diagnosis (SDM refers to the display unit)	SDM Part Numbers
   	Exit Diagnostics

   
   

   Vehicles Without SYNC

   
   

   Menu	Submenu
   CHR Diagnosis (CHR refers to the ACM)	CHR Part Numbers / Sirius ESN
   	Radio Signal Strength
   	Walk-Around Speaker Test
   	Exit Diagnostics

4. 4
   To exit faceplate diagnostics, press the power button or select Exit Diagnostics.