General Procedures - Washer Hose Connector

Disconnect

1. 1
   Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
2. 2

   NOTICE: To avoid coupling damage, do not use hand tools to disconnect or connect the C-lock.

   Carefully rotate the locking ring until it turns approximately 90 degrees.

   

3. 3

   NOTICE: The female side of the C-lock connector contains an O-ring. Take care not to lose the O-ring.

   Slide the C-lock coupling away from the component fitting.

   

4. 4

   NOTICE: Do not leave the locking ring in the unlocked position. This will weaken the locking ring and prevent it from seating properly during reassembly, resulting in a leak.

   Rotate the locking ring back to the original locked position.

   

5. 5
   To connect, make sure the C-lock connector locking ring is in the closed position.
6. 6
   Insert the male-threaded fitting into the C-lock coupling.
7. 7
   Gently pull the C-lock coupling to make sure it is installed correctly.