Brake Caliper - Removal and Installation

Removal

1. 1
   Remove the wheel and tire.
   Refer to: Wheels and Tires (204-04A Wheels and Tires, Removal and Installation).
2. 2

   NOTICE: If fluid spills on the painted surface, the affected area must be washed immediately with cold water.

   NOTICE: Make sure all openings are covered.

   Remove the feed bolt and disconnect the front brake hose. Discard the washers.
   Torque:
   Stage 1: 89 lb-in (10 N·m)
   Stage 2: 90°

   

3. 3
   Remove the caliper guide pin bolts and the brake caliper.
   Torque: 19 lb-ft (26 N·m)

   

Installation

1. 1
   To install, reverse the removal procedure.
2. 2
   Bleed the brake system.
   REFER TO: Brake System Pressure Release (206-00 Brake System General Information, General Procedures).