Ford Fiesta Quiz
Body and Paint

Rain Sensor. Removal and Installation

In this manual: Body and Paint
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
2steps
~12min
1/5difficulty
Done 0 of 2

Removal


  1. Remove the rain sensor cover.
    • Remove the upper rain sensor cover.
    • Remove the lower rain sensor cover.

  2. NOTICE: After removing the bracket, wait at least 2 minutes before removing the rain sensor.


    Remove the rain sensor.
    • Disconnect the electrical connector.
    • Release the retainer and remove the rain sensor.

Installation

  1. NOTICE: Make sure the surface is clean and free of foreign material.

    NOTICE: Make sure the insulators are positioned correctly to prevent direct contact with other components.

    To install, reverse the removal procedure.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.