Body and Paint

Windshield Washer Reservoir. Removal and Installation

4steps
~24min
2/5difficulty
Done 0 of 4

Removal

  1. Remove the LH fender splash shield.
    Refer to: Fender Splash Shield (501-02 Front End Body Panels, Removal and Installation).
  2. Disconnect the electrical connector and remove the bolt.
  3. Remove the LH headlamp.
    Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation).
  4. NOTICE: Make sure the open end of the hose is secured above the fluid level in the reservoir.


    Remove the windshield washer reservoir.
    • Remove the reservoir bolt.
    • Disconnect the washer hoses.

Installation

  1. To install, reverse the removal procedure.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.