Audio Control Module (ACM) - Removal and Installation

It is not necessary to remove the Audio Front Control Module (ACM) in order to retrieve the part number. For additional information, refer to Audio Control Module (ACM) Self-Diagnostic Mode in this section.

1. 1
   NOTE: Module configuration is only required if a new ACM is being installed.

   Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Section 418-01.

2. 2
   Remove the instrument panel center finish panel. For additional information, refer to Section 501-12.
3. 3
   Remove the 4 screws and the ACM .
4. 4
   To install, reverse the removal procedure.

   • Download the configuration information to the ACM . For additional information, refer to PMI in Section 418-01.