Ford Focus Quiz
Chassis

Brake Disc

In this manual: Chassis
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
5steps
~30min
2/5difficulty
0408012016020012592N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Item Part Number Description
1 W700672 Brake caliper anchor plate bolts (2 required)
2 — Brake caliper and anchor plate assembly
3 700936 Brake flexible hose retaining clip
4 1125 Brake disc

Removal and Installation
  1. Remove the wheel and tire. For additional information, refer to Section 204-04.
  2. Remove the brake hose retaining clip and hose from the support bracket.
  3. NOTICE: Do not allow the caliper to hang by the brake hose or damage to the hose can occur.

    Remove the 2 brake caliper anchor plate bolts.

    • Discard the bolts.
    • Support the brake caliper and anchor plate assembly using mechanic's wire.
    • To install, tighten new bolts to 125 N·m.
  4. Remove the brake disc.
  5. To install, reverse the removal procedure.
    • Apply brakes several times to verify correct brake operation.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.