Ford Focus Quiz
Body

Bumper Cover - Front

In this manual: Body
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
6steps
~36min
2/5difficulty
Done 0 of 6
NOTE:

Sedan shown, coupe similar.


Item Part Number Description
1 N807389 Grille assembly pushpins
2 8200 Grille assembly
3 17D957 Front bumper cover
4 W709976 Lower air deflector screw (8 required)
5 W710752 Lower air deflector pushpins
6 8B407 Lower air deflector assembly
7 N807389 Front fender-to-bumper cover pushpin (6 required)
8 N807389 Front bumper cover mounting bracket-to-radiator support pushpin (2 required)
9 17D958 LH/ 17D959 RH Front bumper cover mounting bracket
10 W710771 Front bumper cover mounting bracket nut (4 required)
11 W714665 Front fender bolt (2 required)
12 W704340 Upper bumper cover pushpins

Removal and Installation NOTE:

The front bumper beam is a welded on component.

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  2. NOTE: Sedan shown, coupe similar.

    Remove the 4 radiator grille pin-type retainers and the radiator grille.

  1. Remove the radiator lower air deflector. For additional information, refer to Section 501-02.
  2. NOTE: Sedan shown, coupe similar.

    Remove the 6 fender splash shield pushpins.

  1. Remove the fog lamp wiring harness pin-type retainer and position aside.
  2. NOTE: Sedan shown, coupe similar.

    Remove the 2 upper bumper cover pin-type retainers.

  1. NOTE: LH sedan shown, RH and coupe similar. NOTE:

    The headlamp was removed for better view of pushpin.

    Remove the 2 pushpin retainers from the bumper cover mounting reinforcement bracket located beneath the headlamps.
  1. NOTE: Sedan shown, coupe similar.

    Remove the 4 bumper cover mounting reinforcement bracket nuts.

  1. NOTE: Sedan shown, coupe similar. NOTE:

    The rearward upper portion of the bumper cover must be pulled outward to release the bumper cover mounting reinforcement from the front LH and RH fender.

    Remove the bumper cover.
  1. NOTE: Sedan shown, coupe similar.

    Disengage the bumper cover from the retaining brackets and remove the bumper cover by peeling from the wheel well first.

  1. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.