Ford Focus Quiz
Body

Bumper Cover - Rear

In this manual: Body
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
8steps
~48min
2/5difficulty
Done 0 of 8
NOTE:

Sedan shown, coupe similar.


Item Part Number Description
1 17D948 RH/ 17D949 LH Bumper cover brackets
2 17K835 Bumper cover assembly
3 W714665 Fender splash shield-to-bumper cover pin-type retainers (2 required)
4 16K262 Bumper cover-to-bumper beam pin-type retainers
5 N806034 Bumper cover assembly upper retainer screws (2 required)
6 16K262 Bumper cover assembly upper pin-type retainer (4 required)
7 W708319 Bumper cover insert nut
8 W505425 Bumper cover-to-support brace screw

Removal and Installation
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  2. Remove the tail lamp assemblies. For additional information, refer to Section 417-01.
  3. Disconnect the license plate light electrical connector.
  1. Remove the 4 bumper cover upper pin-type retainers.
  2. Remove the 2 upper bumper cover retainer screws.
  3. NOTE: Sedan shown, coupe similar.

    Remove the 2 fender splash shield-to-bumper cover pin-type retainers (1 each side).

  1. NOTE: Sedan shown, coupe similar.

    Remove the lower bumper cover pin-type retainers.

  1. NOTE: Sedan shown, coupe similar.

    Remove the bumper cover-to-support brace screws (1 each side, Sedan only).

  1. NOTE: The forward upper portion of the bumper cover must be pulled outward to release it from the bumper cover mounting reinforcement bracket.

    Remove the bumper cover.

  2. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.