Exterior Front Door Handle

The door glass must be completely raised.

1. 1
   Remove the front door trim panel. For additional information, refer to Section 501-05.
2. 2
   Peel back the watershield.
3. 3
   Remove the exterior door handle access hole grommet from the door (coupe only).
4. 4
   NOTE: The screw must be fully disengaged from the door lock cylinder bezel, although it is not necessary to fully remove the screw.

   Loosen the door lock cylinder bezel screw.

5. 5
   Remove the door lock cylinder bezel.
6. 6
   NOTE: Slide the front exterior door handle rearwards to release.

   Remove the front exterior door handle.

7. To install, reverse the removal procedure.