Exterior Rear Door Handle

The door glass must be completely raised.

1. 1
   Remove the rear door trim panel. For additional information, refer to Section 501-05.
2. 2
   Peel back the watershield.
3. 3
   NOTE: The screw must be fully disengaged from the door lock cylinder bezel although it is not necessary to fully remove the screw.

   Loosen the rear door exterior handle bezel screw.

4. 4
   Remove the rear door exterior handle bezel.
5. 5
   NOTE: Slide the rear exterior door handle rearwards to release.

   Remove the rear exterior door handle.

6. To install, reverse the removal procedure.