Body
Fog Lamp - Removal and Installation
In this manual: Body
5steps
~30min
2/5difficulty
Done 0 of 5
Sedan
Coupe
Removal and Installation NOTE:
| Item | Part Number | Description |
|---|---|---|
| 1 | 15266 | Fog lamp bezel |
| 2 | W706805 | Fog lamp screws (4 required) |
| 3 | 15200 | Fog lamp |
| 4 | — | Fog lamp electrical connector (part of 14290) |
Coupe
| Item | Part Number | Description |
|---|---|---|
| 1 | — | Fog lamp electrical connector (part of 14290) |
| 2 | N807011 | Fog lamp screws (4 required) |
| 3 | 15200 | Fog lamp |
Removal and Installation NOTE:
Make sure the headlamp switch and the ignition switch are in the OFF position.
Sedan or coupe- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
- Release the tabs and remove the fog lamp bezel from the front bumper cover.
- For the RH fog lamp, remove the horn. For additional information, refer to Section 413-06.
- For the LH fog lamp on Partial Zero Emissions Vehicle (PZEV) vehicles, remove the air cleaner. For additional information, refer to Section 303-12.
- Disconnect the fog lamp electrical connector.
- Remove the 4 screws and the fog lamp.
- To install, reverse the removal procedure.
- If necessary, adjust the fog lamps. For additional information, refer to Front Fog Lamp Adjustment in this section.
Test yourself
A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?