Body

Headlamp Assembly - Removal and Installation

3steps
~18min
2/5difficulty
Done 0 of 3

Item Part Number Description
1 W707594 Headlamp assembly bolts (3 required)
2 13008 Headlamp assembly
3 — Headlamp assembly electrical connectors (part of 14290)

Removal and Installation
  1. Remove the radiator grille. For additional information, refer to Section 501-08.
  2. NOTE: There is a blind metal snap located on the lower outboard side of the headlamp assembly that is disengaged by pulling upwards on the headlamp assembly.

    Remove the 3 bolts and the headlamp assembly.

    • Disconnect the electrical connectors.
  3. To install, reverse the removal procedure.
    • If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment in this section.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.