Ignition Lock Cylinder - Removal and Installation

For non-functional ignition lock cylinders, the steering column lock module has to be replaced. For additional information, refer to Section 211-05.

1. 1
   Remove the Passive Anti-Theft System (PATS) transceiver. For additional information, refer to Section 419-01B.
2. 2
   Remove the ignition lock cylinder.

   1. Insert and turn the ignition key to the ACC position.

   2. Using a suitable tool, press the detent.

   3. Remove the lock cylinder.

1. 1
   If a new lock cylinder with keys is replaced, the new PATS keys must be programmed. For additional information, refer to Key Programming Using Diagnostic Equipment in Section 419-01B.
2. 2
   To install, reverse the removal procedure.