Body

Parcel Shelf

7steps
~42min
2/5difficulty
0204060801005541N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Item Part Number Description
1 W706635 Parcel shelf pin-type retainers (2 required)
2 46668 Parcel shelf
3 — Safety belt retractor bezel
4 — Safety belt retractor bolt (part of 611B66)
5 611B66 Safety belt retractor

Removal and Installation All vehicles
  1. Remove the rear seat cushion.
    • From underneath the cushion front edge, push the 2 seat cushion latch releases toward the LH side of the vehicle.
    • Lift up the front edge of the cushion and remove.
  2. Remove the rear center safety belt anchor bolt.
    • To install, tighten to 55 N·m.
4 door
  1. Remove the RH and LH quarter trim panels. For additional information, refer to Quarter Trim Panel — 4-Door in this section.
2 door
  1. Remove the RH and LH C-pillar trim panels. For additional information, refer to C-Pillar Trim Panel in this section.
All vehicles
  1. Fold the rear seat backs downward to the flat position.
  2. Remove the safety belt retractor bezel.
    • Pull the safety belt retractor bezel toward the front of the vehicle.
    • Remove the safety belt retractor bezel from the safety belt.
  1. Remove the 2 parcel shelf pin-type retainers.
  2. Remove the parcel shelf.
    • Pull the parcel shelf toward the front of the vehicle.
    • Pull the center safety belt rearward through the center retractor opening.
  3. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.