Chassis

Toe Adjustment - Front

3steps
~18min
2/5difficulty
03060901201508059N·mlb·ft
Tightening torque found on this page
Done 0 of 3

  1. Using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position.
  2. Using alignment equipment and the manufacturer's instructions, measure the toe.
  3. Loosen the tie-rod end jam nuts.
  1. Remove the steering gear boot outer clamps.
  1. Rotate the tie rods as necessary to adjust the toe setting.
  1. Tighten the tie-rod end jam nuts to 80 N·m.
  1. Install the steering gear boot outer clamps.
  1. Recheck the toe settings, adjust as necessary.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.