Chassis

Toe Adjustment - Rear

4steps
~24min
2/5difficulty
03060901201509066N·mlb·ft
Tightening torque found on this page
Done 0 of 4

  1. Jounce the vehicle to make sure that the suspension is in its normal resting position.
  2. Using alignment equipment and the manufacturer's instructions, measure the toe.
  3. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  4. Loosen the rear lower arm adjustment cam nut.
  1. Adjust the toe setting by rotating the nut and eccentric washer.
  1. Tighten the rear lower arm adjustment cam nut to 90 N·m.
  1. Recheck the toe settings, adjust as necessary.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.