Powertrain

Transmission Fluid Cooler Tubes

4steps
~24min
2/5difficulty
Done 0 of 4
Material
Item Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLV MERCON® LV

Transmission Fluid Cooler Tubes
Item Part Number Description
1 7J081 Transmission fluid cooler tube secondary latches
2 — Transmission fluid cooler tube latches (part of 7890 assembly)
3 7890A Transmission fluid cooler outlet tube
4 7890B Transmission fluid cooler inlet tube

Removal
  1. Remove the Air Cleaner (ACL) . For additional information, refer to Section 303-12.
  2. Remove the 4 transmission fluid cooler tube secondary latches from the transmission fluid cooler tubes.
  1. Disconnect the transmission fluid cooler tubes from the transaxle and the transmission fluid cooler and remove the transmission fluid cooler tubes.
    1. Compress the tabs on the transmission fluid cooler tube latches and slide the latch out of the transmission fluid cooler tube to unlock the transmission fluid cooler tube from the transaxle or transmission fluid cooler.
    1. Remove the transmission fluid cooler tubes.
Installation
  1. If the transmission fluid cooler tube latches are not in the unlocked position, compress the tabs on the transmission fluid cooler tube latches and slide the latch out of the transmission fluid cooler tube to unlock the latch.
  1. Install the transmission fluid cooler tubes. Connect the transmission fluid cooler tubes to the transaxle and the transmission fluid cooler until they bottom out and slide the latches to the locked position.
    • Pull back on each connector to confirm that it is locked on the transaxle or the transmission fluid cooler.
  1. Install the 4 transmission fluid cooler tube secondary latches.
  1. Install the ACL . For additional information, refer to Section 303-12.
  2. Check the transmission fluid and fill if necessary.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.