Azimuth System Check. General Procedures

Check

1. 1
   Turn the ignition on, turn the engine off.

   

2. 2
   Apply the parking brake.
3. 3
   For automatic transmission, place the selector lever in DRIVE (D). For manual transmission, place the shift lever in the FIRST GEAR position.
4. 4
   Position the test objects as shown in the illustration. Refer to Specifications in this section.
5. 5
   Monitor the suspect Active Park Assist sensor Parameter Identifications (PIDs) to verify that the module detects objects when placed at the specified locations and record the distances.
6. 6
   Make sure the recorded distances are within the acceptable limits.
7. 7
   If the Active Park Assist system does not detect objects, refer to Diagnosis and Testing in this section.