Brake Caliper - Removal and Installation

Removal

1. 1

   NOTICE: Brake pads with adhesive on the insulator are for single use only. Once the brake pads are separated from the brake caliper, new brake pads must be installed to prevent brake noise and shudder.

   Remove and discard the front brake pads.
   Refer to: Brake Pads (206-03 Front Disc Brake, Removal and Installation).
2. 2
   Remove the brake caliper bolt, washers and the brake caliper. Discard the washers.
   Torque: 18 lb-ft (25 N·m)

   

Installation

1. 1

   NOTICE: Make sure the brake hose is not twisted when installing the brake caliper or damage to the flexible brake hose may occur.

   To install, reverse the removal procedure.
2. 2
   Bleed the brake system.
   REFER TO: Brake System Pressure Release (206-00 Brake System General Information, General Procedures).