Key Programming Using Two Programmed Keys. General Procedures

Programming

1. 1
   Locate the passive key backup starting location. Refer to the Owner's Literature for the passive key backup starting location.
2. 2
   Place the first previously programmed passive key at the backup starting location. Press the START/STOP button.
3. 3
   Wait 5 seconds, then press the START/STOP button.
4. 4
   Remove the first previously programmed passive key.
5. 5
   Within 10 seconds, place the second previously programmed passive key at the backup starting location and press the START/STOP button.
6. 6
   Wait 5 seconds and press the START/STOP button.
7. 7
   Remove the second previously programmed passive key.
8. 8
   Wait 5 seconds, then place the unprogrammed passive key at the backup starting location and press the START/STOP button.
9. 9
   Verify that the RKE transmitter operates and the vehicle starts using the new passive key.